Nail

Common Nail

Material: low carbon steel Q195, Q215, Q235 specifications: 2 x 25 mm < < 2 ", "1", 2.5 x 50 mm, 3.4 < 2.5 ", 4 x 75 x 65 mm mm < 3 ", 4.5 x 100 mm < < 5 "4", 4.5 x 125 mm

Common Nail

Material: low carbon steel Q195, Q215, Q235 specifications: 2 x 25 mm < < 2 ", "1", 2.5 x 50 mm, 3.4 < 2.5 ", 4 x 75 x 65 mm mm < 3 ", 4.5 x 100 mm < < 5 "4", 4.5 x 125 mm

Common Nail

Material: low carbon steel Q195, Q215, Q235 specifications: 2 x 25 mm < < 2 ", "1", 2.5 x 50 mm, 3.4 < 2.5 ", 4 x 75 x 65 mm mm < 3 ", 4.5 x 100 mm < < 5 "4", 4.5 x 125 mm

Common Nail

Material: low carbon steel Q195, Q215, Q235 specifications: 2 x 25 mm < < 2 ", "1", 2.5 x 50 mm, 3.4 < 2.5 ", 4 x 75 x 65 mm mm < 3 ", 4.5 x 100 mm < < 5 "4", 4.5 x 125 mm

Roll Nail

Consists of a set of equidistant same shape arrangement of several single nail and fittings, fittings can be plated copper wire, fitting in with the center line of the screw rod into beta Angle direction, connected to each nail, will string together all the nail, and then rolled into a roll.

Cement Nail

Masonry nail, commonly known as steel nails, is one of the types of nails, using carbon steel production, material have 45 # steel or 60 # steel, through wire drawing, annealing, nail, such as quenching process, so the quality of a material is harder. It is the function of nail in some more stiff other nails on the object, because the material is very different with the ordinary nails, belongs to the special nails. Masonry nail hardness is very big, thick, short, create ability is very strong.

Turf Nail Series

U nailed, also known as grass, general shape can be divided into: lag turf nails, nail, round head turf G grass nail, nut grass nail four; Material has cold wire drawing, galvanized wire, galvanized steel wire, stainless steel wire, etc. Wire diameter from 14 # 4 #, the width of the range of 2 cm to 10 cm, 5 cm range - 50 cm long legs.

Fence U nail

U nailed, also known as grass, general shape can be divided into: lag turf nails, nail, round head turf G grass nail, nut grass nail four; Material has cold wire drawing, galvanized wire, galvanized steel wire, stainless steel wire, etc. Wire diameter from 14 # 4 #, the width of the range of 2 cm to 10 cm, 5 cm range - 50 cm long legs.

Sod series

U nailed, also known as grass, general shape can be divided into: lag turf nails, nail, round head turf G grass nail, nut grass nail four; Material has cold wire drawing, galvanized wire, galvanized steel wire, stainless steel wire, etc. Wire diameter from 14 # 4 #, the width of the range of 2 cm to 10 cm, 5 cm range - 50 cm long legs.

Sod series

U nailed, also known as grass, general shape can be divided into: lag turf nails, nail, round head turf G grass nail, nut grass nail four; Material has cold wire drawing, galvanized wire, galvanized steel wire, stainless steel wire, etc. Wire diameter from 14 # 4 #, the width of the range of 2 cm to 10 cm, 5 cm range - 50 cm long legs.

Types and basic characteristics of wire mesh

In a broad sense, wire mesh includes all metal wire mesh, including iron, steel, stainless steel, gold, silver and copper. In a narrow sense, it only refers to the metal wire mesh made of iron.Here we will sort out the types and basic features of common wire mesh.

What is the difference between the composition and production process of iron wire and that of black iron wire?

Process: hot metal billets are rolled into 6.5mm thick wire rods, which are then put into the wire drawing device and drawn into lines of different diameters. The hole diameter of the wire drawing disc is gradually reduced, and various iron wires of different specifications are made by cooling, annealing, coating and other processing processes.

If headless nails are used to fix the installation skirting line?

Many owners will install skirting boards at the junction of the wall and the ground when decorating. During installation, if headless nails are used for fixing, how to install them? Today, Hao Yuequan will give a comprehensive answer!

What do you need to nail on the wall?

Generally, nails can be driven into the wall, but it is difficult to drive nails into the lime wall. Therefore, if you want to nail, you need to pay attention to some problems, and do not damage the wall due to incorrect operation.

Pain Points of Hardware Machinery Industry Management

The hardware machinery industry is a traditional processing industry, which mainly divides raw materials, then processes them, assembles parts, and finally assembles them into products. China's hardware manufacturing industry is mature, and the export of hardware products has increased in recent years.

Fatal Factors Easily Neglected in Hardware Machinery Enterprises

The competition of hardware machinery enterprises is fierce. At this stage, the competition of hardware machinery enterprises is undoubtedly the competition of the three major factors of products, services and sales models. However, no matter which aspect is excellent, they can stand out from other enterprises in the industry and effectively get rid of the vicious competition in the industry.

How did the nails on the wall come down

First, remove the cement around the nail with a small steel chisel, then clamp the exposed nail tail with a big pliers, turn it left and right, shake it, and slowly rotate it out when the nail is felt to be moving.

Characteristics of flange type double deck corrugated compensator

Flange type double deck corrugated compensator has the characteristics of small stiffness, good flexibility, large compensation, long fatigue life, etc. It has been widely used in aerospace, shipbuilding, automobile, petrochemical, thermal energy and other industries.

What is a headless nail? For what scenarios?

The headless screw, as its name implies, is a kind of headless screw. It is mainly used to fasten the connection of the hole position in the connection mechanism with unchanged countersunk head, and plays the role of locking, simple positioning and limiting.

Basic Knowledge of Metal Materials

Metallic materials refer to metal elements or materials with metal characteristics mainly composed of metal elements. Including pure metals, alloys, intermetallic compounds of metal materials and special metal materials. (Note: Metal oxides (such as aluminum oxide) are not metal materials)