If headless nails are used to fix the installation skirting line?

Many owners will install skirting boards at the junction of the wall and the ground when decorating. During installation, if headless nails are used for fixing, how to install them? Today, Hao Yuequan will give a comprehensive answer!

1、 What is the installation method of toe board headless nails?

1. During the specific installation, first prepare the materials according to the length, cut the skirting line, and then use the impact drill to drill holes on the wall. Pay attention to the water and electricity distribution diagram when drilling to prevent damage to electric wires and water pipes. The distance between them should not be too large. In order to install more firmly, it should be controlled within 40cm, and the distance at the interface can be smaller.

2. Nail the cork into the hole just drilled. Determine the drilling position, level the hole with a wooden plug, and then nail the skirting board on the wooden plug with a headless nail. All the wooden nails should be submerged in the skirting line. You can't see them. Only in this way can we ensure that the skirting line is close to the wall. In addition, it should be considered that the skirting line may be installed like the floor due to thermal expansion and contraction in the later period, so as to avoid arching, and a 1cm expansion joint should be left.

2、 Nails or glue for skirting installation?

1. Whether to use nails or glue, you need to consider the material. If you choose wood, such as solid wood skirting, you can choose to nail it or install it with clips.

2. If stainless steel is selected, first fix the buckle with nails or expansion screws, and then insert it into the groove to ensure firm installation.

3. If it is made of glass, it can be pasted with glass glue. First, apply glass glue on the skirting line, and then apply emulsion paint for treatment. This will ensure that there is no difference in the interface and the connection will be more natural.