Welded wire mesh

The electric welding mesh is welded by high-quality low-carbon steel wire. First, select high-quality wire rods to thin the raw materials through wire drawing and annealing processes, then cut out the size of the warp and weft wires to be welded through a straight wire machine, and then place them on an advanced wire mesh machine for row welding. The welding procedure of the welded mesh is automatically controlled by the computer. The welding quality is good, and the mechanical properties of the steel bar before and after welding have almost no change. Hangnuo electric welding mesh has uniform mesh, firm welding, flat mesh surface, strong corrosion resistance, strong protection ability, reasonable price and guaranteed quality!

Use of electric welding mesh: because the electric welding mesh has simple structure, wide use, beautiful and practical, convenient transportation, and installation is not limited by topographic relief, especially for mountainous areas, sloping fields, and multi curved areas, it has strong adaptability, low price, and is suitable for large-scale use. Welded mesh is widely used in industry, agriculture, aquaculture, construction, transportation, mining, etc. Such as machine protective cover, animal fence, flower and tree fence, window fence, passage fence, poultry cage, egg basket, household office food basket, paper basket and decoration.

Electric welding mesh

Teach you how to select high-quality welding mesh:

1、 First, the welding shall be firm. The electric welding mesh with unstable welding points is just like scrap iron. It is not allowed to solder the mesh or solder skips. For example, the total height of two 4mm welding meshes should be 6-7mm after 8mm welding. If the welding spot of the mesh is too shallow, the welding is not firm; if the welding spot is too deep, the mesh has no support and is easy to break. Hangnuo electric welding mesh has uniform mesh, firm welding, flat mesh surface and strong protection capability!

2、 Welding mesh size. Generally, the size of the construction mesh is not very precise, and the mechanical or individual requirements are relatively precise. It depends on personal needs. Generally, within 5mm of the diagonal, the size of plus or minus 2mm is normal (because the mesh is welded, the light heat expansion and cold contraction will also be 1-2mm different). Hang Nuo reminds you that if it is an export mesh, it should be customized according to the front hole.

3、 Wire diameter of welding mesh. The wire diameter of the mesh need not be explained too much. As we all know, the export standard should be controlled within ± 0.05mm.